Home » Home Services

Category Archives: Home Services

Choosing the Right Water Heater

Heating water is one of the biggest household energy expenses. Choosing the right heater can help you save money and reduce your environmental impact.

Traditional storage tanks and tankless (on-demand) water heaters are big metal cylinders typically located in the garage or basement. They use electricity, gas, or oil as the heating mechanism. Contact Water Heater Denver now!

Water heaters are big metal cylinders, often confined to a utility room or basement. They look pretty straightforward, but they have ingenious designs on the inside that make hot showers possible. Whether you have a gas, electric or tankless model, they all work the same way. But if you want to reduce your energy costs, a simple step like turning the temperature setting down by 10 degrees could save 2 percent to 5 percent of your total utility bill.

The water heater is the most common source of hot water in your home, providing an average of 40 to 80 gallons per day for showers, washing machines and other appliances. Most water heaters use piped natural or LP (liquefied petroleum) gas, but some are electric and can operate anywhere with an electricity supply.

A typical tank-type water heater has an insulated tank that holds the hot water for your household. The tank is usually sized to meet the needs of the household, with a capacity of between 20 and 80 gallons. The insulating tank keeps the water warm, and the heating mechanism heats the water to a higher temperature as it flows through the bottom of the tank. This tank also contains a drain valve, a temperature and pressure relief valve and a heat-out pipe that allows the heated water to flow to your hot water service line.

Another option is a stand-alone gas or electric tankless water heater that uses super-heated coils to produce only the amount of hot water you need, when you need it. These models have much lower energy consumption than traditional water heaters and can be run on renewable or alternative fuel sources to further cut your utility bills.

Another type of stand-alone water heater is the point-of-use unit, which is installed near your showers and sinks for instantaneous heating as you use them. This is an excellent choice for those interested in electrifying their homes with solar panels, since it maximizes the use of your renewable power while reducing the overall dependence on fossil fuels.

Types of Water Heaters

Water heaters are one of the hardest-working appliances in any home. Almost every household uses them multiple times a day, and when they break down it can be a major disruption. But if you take the time to learn about different types of water heaters, it can help you make a smart choice when you’re ready for a new one.

The most common water heaters use a large tank to store hot water until it’s needed. These can be gas or electric and are relatively affordable to purchase and install. However, they do require maintenance, have a limited supply of hot water and can become prone to leaks over time.

Another option is a tankless or on-demand water heater. These heat water as it flows through the unit, rather than heating and storing it like traditional models. They are available in both gas and electric versions, though the latter tend to have a lower energy efficiency rating than their natural or propane-powered counterparts.

Point-of-use water heaters focus on heating only the water that’s used at a particular faucet or appliance, which allows them to have greater energy efficiency than whole-house water heaters. These are often chosen to heat household faucets like showers, sinks and washing machines. They are also commonly installed as backups for a household’s main water heater.

Condensing water heaters use exhaust gases from the home’s furnace to help fuel the water heating elements, saving on electricity costs. They can be either gas or electric, and are usually found in homes that already have a natural gas heating system.

There are many other options for water heaters, including solar-powered and hybrid electric-gas units. It’s important to understand the pros and cons of each type so you can choose the right one for your home.

The first step in choosing a water heater is to consider the size of your family and how much hot water you need on-demand. You’ll also want to consider the cost of the water heater and its installation, as well as how efficient it is. It’s also a good idea to look for an ENERGY STAR® qualified water heater, which will have the highest efficiency ratings and savings potential.

Tank-Type Water Heaters

A traditional tank water heater features an insulated tank that heats and stores hot water until it’s needed. It can be powered by electricity or natural gas and is typically found in most homes. These water heaters tend to be larger than tankless models, requiring a dedicated space for the unit in your home. They also require regular cleaning and draining, as sediment can build up in the bottom of the tank. However, newer models have been designed to reduce energy consumption and offer better efficiencies, making them more cost-effective than older models.

When deciding on a tank water heater, look for one with an Energy Guide Label that tells you the model’s first-hour rating (FHR). To determine the right size to buy, add up how many people live in your household and consider their peak usage. For example, a family of four may take several showers and run the dishwasher and washing machine during one day, using up to 100 gallons of hot water during peak demand. A tank water heater with a FHR that matches or exceeds this amount should provide enough hot water for your home.

If you live in an area with hard water, a stainless steel tank is recommended because it will last longer than a conventional fiberglass tank. Also, look for features that help extend the life of your water heater, such as anti-scale devices that prevent the buildup of mineral deposits and reduce corrosion.

Other options for your water heater include a high-efficiency condensing gas water heater. This type of water heater captures heat from exhaust gases that would otherwise be vented and recycles it to help raise the temperature of your water, saving you money on energy costs.

Another option is a tankless, or on-demand, water heater, which uses a high-powered burner to quickly heat your water and deliver it directly to the faucet or shower without storing it in a reservoir. It can be powered by electricity or gas and offers greater efficiency than a storage tank model, saving you up to 22 percent on your energy bills.

Tankless Water Heaters

Tankless water heaters have no storage tank, but instead heat water on demand, instantaneously. When you open a hot water tap, a sensor recognizes the demand and starts to heating the water with either a gas burner or electric elements. Once your demand ceases, the unit shuts down and stops using energy until you turn on a faucet again.

Compared to tank water heaters, tankless units consume less energy and can save you significant amounts of money in the long run. Tankless units avoid the energy costs of continuously heating and reheating 40+ gallons of water, as well as the associated standby losses of energy that occur when a water heater is operating but not producing hot water (also known as “phantom load”).

A tankless unit’s ability to provide your home with on-demand hot water is limited by the flow rate of your water lines. The average tankless unit can handle 2-5 gallons of hot water per minute. If your home demands more than this, you may need to install multiple units or a higher-capacity model.

The most popular brand of tankless water heater in North America is Rinnai, which offers a variety of gas models at various price points and efficiencies. Other manufacturers include Bosch, Noritz, Rheem, and Stiebel Eltron.

While a tankless water heater can be a great investment, it’s best to leave installation to a professional. It’s not a do-it-yourself project, and it will often require updates to your home or building’s plumbing and electrical systems in order to work properly. Depending on the model you choose, you may also need to install ventilation piping. Finally, you’ll need to do a few basic preventative maintenance tasks annually.

Mold Removal – A Multi-Step Process

A few spores of mold on your walls are nothing to worry about, but for major infestations you may need professional help. A good remediation company can advise you on the best ways to deal with it.

Natural cleaning methods for removing mold from wall surfaces include vinegar, hydrogen peroxide and baking soda. Apply the solution or paste to affected areas, scrub and rinse with water. Click the https://acemoldspecialist.com/ to learn more.

Mold remediation is the process of identifying, cleaning up and preventing future growth of mold. It involves a multi-step process that includes containment, sanitation, and restoration of the affected area. A professional mold remediation company will use physical barriers to isolate and protect areas of your home during the cleanup. They’ll also use negative air pressure and spray surfaces to eliminate airborne mold spores.

When you’re dealing with a major mold problem, it’s important to remove and dispose of all infected materials. This may include drywall, insulation, and wood flooring. The technicians will also clean surfaces and deodorize the space to make it safe for you and your family. They’ll also clean and disinfect any furniture, clothing, hard goods and personal items that can be saved.

Once the contaminated materials are removed, the technicians will dry and clean the space. They’ll also inspect the affected areas for re-growth. If any spores remain, they’ll treat the area with a biocide or fungicide to prevent further growth.

While removing impacted materials, the technicians will also check for moisture and humidity issues that could cause mold to grow again. They’ll take precautions to fix these problems and prevent future mold growth, including fixing leaks, cleaning dirty or blocked air ducts and sealing crawl spaces with vapor barriers or encapsulation.

Depending on the severity of the mold, it may be possible for you to stay in your home during the remediation process. However, you should leave the property during mold remediation if you’re sensitive to microscopic mold spores.

Once the contaminated areas are cleaned, it’s important to restore them to their original condition. This will include repairing and replacing drywall, insulation and flooring, as well as sanitizing the space with a disinfectant. It’s also important to fix the moisture problem that caused the initial mold growth, such as a plumbing leak or excess humidity. Failure to do so will allow mold to return quickly and cause further damage.


Mold is a type of fungus that thrives on moisture and organic material. If left unchecked, it can damage surfaces and even deteriorate materials such as wood or cardboard. Mold spores spread easily through the air and can cause health problems for people with sensitive respiratory systems or weakened immune systems.

Mold cleaning involves scrubbing and washing surfaces with detergent solutions and disinfectants. Some materials like carpeting or drywall may need to be replaced once they are affected by mold if they can no longer be cleaned. Professionals also sanitize the area to kill any remaining spores and prevent them from spreading to other areas.

A professional mold clean-up starts with inspection to determine the severity of the mold infestation and locate the source. This is especially important in rooms with a lot of moisture like bathrooms and basements. Moisture meters are often used to find areas with elevated levels of humidity that can lead to mold growth.

Once the inspection is complete, the mold removal begins. It’s crucial to use a special respirator and goggles during this process. Make sure that all windows are open and a fan is running to vent the space during the cleaning process to control airborne spores. Tape plastic over window openings to keep spores from blowing back in and double-bag materials that can’t be washed like heavily-infested carpets or debris for disposal.

During the cleaning process, professionals can wipe away surface mold and mildew with a cloth or scrub brush. For a deeper cleaning, they may use a solution of baking soda, hydrogen peroxide, or vinegar. These natural cleaners can kill mold roots on porous surfaces unlike bleach, which can only remove the surface.

After the contaminated area is clean, it’s important to dry everything completely before moving back in. Using a dehumidifier and fan can help speed up this process. Anything that was wet with water should be discarded or taken outside and photographed for insurance claims. Fix any leaks and other water issues right away to prevent the mold from returning.


Once all the moldy materials have been removed, they must be disposed of properly to prevent contamination. The waste must be placed in sealed plastic bags that are marked “Mold Contaminated Material” for proper disposal, and it must be transported to a landfill or other waste facility. Depending on the amount of waste, this step can take one to five days.

Mold removal can be hazardous for homeowners, so it is recommended that they consult with a trained mold remediation specialist to complete this task. These professionals can assess the situation, identify the type of mold and determine the extent of damage to the property. They also have experience in dealing with the insurance company and can help make the process easier for their customers.

If the homeowner decides to do the work himself or herself, it is important that he or she wears safety equipment. This includes a respirator, rubber gloves and goggles to protect against mold spores. He or she should set an old box fan in a window to ventilate the area while working and double-bag any contaminated materials in garbage bags for disposal.

It is also a good idea to fix the water problem that led to the mold. This may mean repairing leaky pipes or addressing excess humidity levels. Keeping the area dry is essential to prevent mold re-growth, and it can be done by washing surfaces with a mild cleaning product. Chlorine bleach can be used in areas that cannot be kept completely dry, but it must be diluted with water to avoid the formation of toxic vapors.

It is also a good idea to wear a dust mask while cleaning, as well as to wear a rubber glove when handling wood or drywall. This will prevent the spread of mold spores into other parts of the house or to people living in other dwellings. Once all of the damaged materials have been removed and disposed of, the home should be cleaned and disinfected to ensure that no mold spores remain in the air. It is also a good idea to replace any materials that have been stained or otherwise damaged by the mold, as these items are often not able to be restored.


The restoration step includes replacing the mold-damaged materials, such as drywall and insulation. After that, dehumidifiers and fans are used to dry the area. Then, if walls are made of brick or cement, paint that contains mildewcide can be applied to stop mold growth in the future. Remediation contractors usually do this work, but homeowners can use mildewcide themselves to keep mold from recurring.

After cleaning and disinfecting, remediation companies re-inspect the space to see if there’s any additional work to be done. Often, this involves correcting the problem that caused the mold, such as fixing leaks or improving ventilation.

Molds come in a wide variety of colors and textures. Some types of mold can cause serious health problems. Others may be merely unsightly, although some people find that even just the presence of mold in their homes makes them feel sick. The color of the mold, how far it has spread and what type of mold it is, all affect how much it costs to remove.

If you spot a small area of mildew or a few spots of mold in your home, you might be able to get rid of it yourself by using household cleaners and a bit of scrubbing. However, if the mold is extensive, or if it’s black mold, you should call in a professional. They have the equipment, including N95 masks and personal protective gear, to handle the job safely. They will also address the source of the mold and make sure it doesn’t return with greater force, which may involve addressing your furnace and air ducts.

If you live in NYCHA and suspect mold in your apartment, report it to your landlord immediately through the CCC, MyNYCHA app or website. If the mold is located in a common space like a hallway, the landlord will schedule an inspection. Then, he will decide whether to take action against the tenant for the breach of the lease agreement. If the landlord does not take action, you can file a complaint with the City Council Housing Committee. If the problem is severe, you can also apply to the Tenant Defense Fund for assistance with paying for mold removal.